title

Sidereal Technology systems can be purchased through:

Suggested list pricing:

$400 - Dual Servo Telescope Controller I (Serial cable included)
$895 - Dual Servo Telescope Controller II
$95 - SiTech Wired Handpad with glow in the dark buttons (6' cable included)
$350 - Wireless Handpad Receiver and Transmitter (3' cable included)
$260 - Two US Digital 10,000 count encoders with cabling.
$155 - each New 8000 series 19 volt Pittman D.C. Servo Motor with encoder and 10:1 gear reducer, with modular jacks for plug and play connection (Motor and encoder cables included)
$400 - each. Gear Reducer/Clutch assembly (less motor)
$300 - each. Worm Gear Reducer with motor mount and gearing
$40 - each. Altitude/Azimuth Dual Low Profile Bearings
$75 - each. ScopeII, not required unless desired. Buy direct from BBAstroDesigns

Some recommended groupings, with totals:

Bare Bones system, you provide the gearing. This will work great on equatorials, GEM's and Alt/Az scopes.

SlewNTrack system with Wired Handpad:

DragNTrack system with Wired Handpad:

SlewNTrack system with Wireless Handpad:

$400 - Dual Servo Telescope Controller (Serial cable included)
$350 - SiTech Wireless Handpad with glow in the dark buttons (3' cable included)
$310 - Two Motors(Motor and encoder cables included)
$600 - Two Worm Gear Reducers
$0 - SiTech ASCOM driver, ServoConfig
$1660 - Total. You will have to add the belt drives and pulleys

DragNTrack system with Wireless Handpad

$400 - Dual Servo Telescope Controller (Serial cable included)
$350 - SiTech Wireless Handpad with glow in the dark buttons (3' cable included)
$310 - Two Motors (Motor and encoder cables included)
$800 - Two Gear Reducer/Clutch assemblies
$260 - Telescope Encoders
$160 - Four Dual Low Profile Altitude Bearing assemblies
$120 - Three Dual Low Profile Azimuth Bearing assemblies
$0 - SiTech ASCOM driver, ServoConfig
$2400 - Total. You will have to add the belt drives and pulleys