title

Sidereal Technology has two dealers:
1. BBAstroDesigns

2. Astro Systems

We are still deciding on some of the pricing, so please take these with a grain of salt. Hopefully we will be able to lower some of them.

Suggested list pricing:

$350 - Dual Servo Telescope Controller (Serial cable, Motor cables included)
$95 - SiTech Wired Handpad with glow in the dark buttons
$350 - Wireless Handpad Receiver and Transmitter
$250 - Two US Digital 10,000 count encoders with cabling.
$125 - each New 8000 series 19 volt Pittman D.C. Servo Motor with encoder and 10:1 gear reducer, with modular jacks for plug and play connection
$400 - each. Gear Reducer/Clutch assembly (less motor)
$300 - each. Worm Gear Reducer with motor mount and gearing
$30 - each. Altitude Dual Low Profile Bearings
$45 - each. Azimuth Dual Low Profile Bearings
$75 - each. ScopeII, not required unless desired. Buy direct from BBAstroDesigns

Some recommended groupings, with totals:

Bare Bones system, you provide the gearing. This will work great on equatorials, GEM's and Alt/Az scopes.

$350 - Dual Servo Telescope Controller (Serial cable, Motor cables included)
$95 - SiTech Wired Handpad with glow in the dark buttons
$250 - Two Motors
$0 - SiTech ASCOM driver, ServoConfig
$695 - Total.

SlewNTrack system with Wired Handpad:

$350 - Dual Servo Telescope Controller (Serial cable, Motor cables included)
$95 - SiTech Wired Handpad with glow in the dark buttons
$250 - Two Motors
$600 - Two Worm Gear Reducers
$0 - SiTech ASCOM driver, ServoConfig
$1295 - Total. You will have to add the belt drives and pulleys

DragNTrack system with Wired Handpad:

$350 - Dual Servo Telescope Controller (Serial cable, Motor cables included)
$95 - SiTech Wired Handpad with glow in the dark buttons
$250 - Two Motors
$800 - Two Gear Reducer/Clutch assemblies
$250 - Telescope Encoders
$120 - Four Dual Low Profile Altitude Bearing assemblies
$135 - Three Dual Low Profile Azimuth Bearing assemblies
$0 - SiTech ASCOM driver, ServoConfig
$2000 - Total. You will have to add the belt drives and pulleys

SlewNTrack system with Wireless Handpad:

$350 - Dual Servo Telescope Controller (Serial cable, Motor cables included)
$350 - SiTech Wireless Handpad with glow in the dark buttons
$250 - Two Motors
$600 - Two Worm Gear Reducers
$0 - SiTech ASCOM driver, ServoConfig
$1550 - Total. You will have to add the belt drives and pulleys

DragNTrack system with Wireless Handpad

$350 - Dual Servo Telescope Controller (Serial cable, Motor cables included)
$350 - SiTech Wireless Handpad with glow in the dark buttons
$250 - Two Motors
$800 - Two Gear Reducer/Clutch assemblies
$250 - Telescope Encoders
$120 - Four Dual Low Profile Altitude Bearing assemblies
$135 - Three Dual Low Profile Azimuth Bearing assemblies
$0 - SiTech ASCOM driver, ServoConfig
$2255 - Total. You will have to add the belt drives and pulleys